ERD for Ambrosio Excellite?

Kenny said:

They were made in 2002. I want to rebuild the wheel with new spokes

but

Quoted message said:

I don't know and can't find the ERD. I know I could find the ERD by
measuring it but I would have to despoke it, and I don't want to do
that until I have the new spokes ready at hand.

Call around and see if anybody has the Wheelsmith measuring rods. I may
have it at work, call me.

303-440-3535

Kenny said:

They were made in 2002. I want to rebuild the wheel with new spokes but
I don't know and can't find the ERD. I know I could find the ERD by
measuring it but I would have to despoke it, and I don't want to do
that until I have the new spokes ready at hand.

I suggest you pull one spoke from the wheel and measure it.
Ambrosio is making a Excelight S.S.C rim shown at:
ambrosiospa.compag108.htmOpen ↗
They don't list the ERD.
Ital-tecno sells this model:
AMBROSIO Excellite Clincher; maybe a call to them @
1-800-210-8830 will get you the answer.

One reason for the rebuild is that the original wheel builder used some
spokes that were too short. Some spokes on the drive side just barely
engaged the nipple threads. Also the wheel has about four different
spoke lengths.