Who sells forks with braze-ons for Shimano roller brakes?
Also, is it possible to mount them on non-brazed forks--if so, where
to you get the mounting parts?
A community for cyclists, gear, training and racing.
Cycling Equipment · Public discussion
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
Who sells forks with braze-ons for Shimano roller brakes?
Also, is it possible to mount them on non-brazed forks--if so, where
to you get the mounting parts?
(Adam Rush) said:Who sells forks with braze-ons for Shimano roller brakes?
Hmm. eBay seller "hunterbc" often lists framesets with roller brake
furniture all around. Maybe email him/her to ask?
Quoted message said:Also, is it possible to mount them on non-brazed forks--if so, where
to you get the mounting parts?
Sturmey-Archer and Sachs/SRAM both offer fork leg clamps with slots to
hold drum brake torque reaction arms. One of those should do.
Chalo Colina
[email hidden] (Chalo) wrote in message news:<[email hidden]>...
Quoted message said:(Adam Rush) said:Who sells forks with braze-ons for Shimano roller brakes?
Hmm. eBay seller "hunterbc" often lists framesets with roller brake
furniture all around. Maybe email him/her to ask?Quoted message said:Also, is it possible to mount them on non-brazed forks--if so, where
to you get the mounting parts?Sturmey-Archer and Sachs/SRAM both offer fork leg clamps with slots to
hold drum brake torque reaction arms. One of those should do.Chalo Colina
Back when I was building mountain bikes from old Varsity frames with
Sturmey-Archer drum brakes, I clamped the torque arms with hose
clamps. Ugly but functional.
Jeff
(Jeff Wills) said:Back when I was building mountain bikes from old Varsity frames with
Sturmey-Archer drum brakes, I clamped the torque arms with hose
clamps. Ugly but functional.
I've done that too (on long-forked choppers in my case),
http://deadbabybikes.org/bikes/choppa.htm
but it negates any quick-release functionality.
Chalo Colina
Adam Rush said:
Who sells forks with braze-ons for Shimano roller brakes?Also, is it possible to mount them on non-brazed forks--if so, where
to you get the mounting parts?
I've been working on an adapter for a Sachs drum hub that uses the disc-brake caliper
mounting tab on a fork; it's nearly done and seems to fit, but I haven't threaded any of
the holes yet so it was difficult holding everything in place (2 pieces, plus the
fork/wheel combo).
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.