Australia and New Zealand · Public discussion

@#$%^$ cycle computer

Started by BruceA · · Last activity · 5 posts · 486 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
Australia and New Zealand
Published
13 September 2005
Last activity
13 September 2005
Original author
BruceA
Posts
5
Discussion status
Public discussion
Total views
486
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. After my training\commuting bike was pinched last week I decided to dust off
    the mountain bike which has remained dormant in the shed for that last few
    years.
    Put slicks and some spare clipless pedals on it, removed a few layers of
    dust and cobwebs and regreased and lubricated all the moving bits. Looks
    pretty shmick now.

    The last task was to replace the batteries in the wireless computer.
    Simple, just unscrew the back, take out the old battery and put in a new one
    .. . . . . . if only!
    The old battery still had enough life in it to make the display work so I
    knew that the computer still worked, but when I put in the new battery . . .
    .. . nothing, the screen just stared blankly at me or gave a brief whimper of
    life then faded out. I pulled it apart and cleaned all the contacts to
    within an inch of their life, but still nothing! It sprang into life twice,
    but of course that was while I had it pulled apart. When I put it back
    together, just the same. Two hours later I had even less hair than normal
    (which doesn't leave alot left!), and then I remembered those sage words
    "google is your friend". On the Cateye site I found that to fix this
    problem you need to put the battery in back to front (ie reverse the poles)
    then take it out and put it in the correct way, something I never would have
    thought of doing. Tried this and what do you know, it works!!! So it's
    working now, but at what cost to my sanity?

    Bruce(aaaaaaaarrrrrggghhhhh)A

  2. On 2005-09-13, BruceA (aka Bruce)
    was almost, but not quite, entirely unlike tea:

    Quoted message said:

    "google is your friend". On the Cateye site I found that to fix this
    problem you need to put the battery in back to front (ie reverse the poles)
    then take it out and put it in the correct way, something I never would have
    thought of doing. Tried this and what do you know, it works!!! So it's
    working now, but at what cost to my sanity?

    You can usually press the correct two buttons to reset it too.

    It's just that it got into an invalid state by having an out-of-spec
    voltage put into it. Reversing the battery would reset it by
    discharging all the capacitors (but I would imagine could be quite
    risky), and pressing the two reset buttons would do the reseting
    electronically.

    --
    TimC
    Look - a diversion! It's shiny! -- Daniel Stone

  3. "TimC" wrote

    Quoted message said:

    You can usually press the correct two buttons to reset it too.

    It's just that it got into an invalid state by having an out-of-spec
    voltage put into it. Reversing the battery would reset it by
    discharging all the capacitors (but I would imagine could be quite
    risky), and pressing the two reset buttons would do the reseting
    electronically.

    Hmmm, good point. I was trying to reset it, but I didn't have the manual
    either. It wasn't until after I had done the battery reversing thing that I
    also found the manual online and discovered that I needed to press 3 buttons
    to reset it! I had been pressing every combination of 2 buttons possible,
    but to no avail!!

    BruceA

  4. TimC said:

    It's just that it got into an invalid state by having an out-of-spec
    voltage put into it. Reversing the battery would reset it by discharging
    all the capacitors (but I would imagine could be quite risky), and
    pressing the two reset buttons would do the reseting electronically.

    Aaah. Now I've got a better idea of just what's getting fscked up in my
    HRM's chest strap. Fairly regularly I need to pull the battery out and
    reseat it to make it work.

    Of course, I should just get it replaced under warranty, but that'd entail
    actually doing something about it...

    --
    Dave Hughes | [email hidden]
    "One of the main causes of the fall of the Roman Empire was that,
    lacking zero, they had no way to indicate successful termination of
    their C programs." -- Robert Firth

  5. On 2005-09-13, Random Data (aka Bruce)
    was almost, but not quite, entirely unlike tea:

    Quoted message said:
    TimC said:

    It's just that it got into an invalid state by having an out-of-spec
    voltage put into it. Reversing the battery would reset it by discharging
    all the capacitors (but I would imagine could be quite risky), and
    pressing the two reset buttons would do the reseting electronically.

    Aaah. Now I've got a better idea of just what's getting fscked up in my
    HRM's chest strap. Fairly regularly I need to pull the battery out and
    reseat it to make it work.

    Of course, I should just get it replaced under warranty, but that'd entail
    actually doing something about it...

    If warranty doesn't fix it, I wonder if there is room in the case for
    a really tiny capacitor across the power supply lines?

    --
    TimC
    Speaker: They used an alcohol fog to visualize what's happening.
    From the audience: That's always worked for me. -- From an astronomy talk

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.