I started riding a year ago after a 40 year break (I'm 54). I got a steel cyclocross bike for navigating the potholed streets of San Francisco (bike-friendly if you don't count homocidal motorists). After a year, feeling that top tube was much too short (with a 12 cm stem). I got a fitting at a pro shop and was told that a 52 cm seat tube and 57 cm top tube was what I needed (legs too short but they do rach the ground).....clearly in custom frame geometry territory. Using the conventional formulas also suggests a 52 seat and at least 57 top tubes.
I'm looking for a road bike that fits. I ride 75 miles a week in the AMs before work, along the ocean-- (salt/sand etc), and it is often moist (between October and April) here.
I test rode several bikes including a stock steel Mondonico and a few stock SEVENs, expensive but felt great, as nice as the steel bike. Of course the stock bikes didn't fit correctly. I borrowed an Aluminium and Carbon bike from friends and did not like the feel.
Any suggestions for a frame that far from stock size? Is the (only slightly) higher cost of Ti for a custom frame worth it? Any suggstions for frame builders?
You can go custom with Seven, Independent Fabrication, Moots, Serotta, and at least some of the Lemond models. I don't know of any custom aluminum builders, but there's gotta be one or two. Steel may still be a viable option. Independent Fabrication seals all their tubes. Only the seat tube (at the top only), bottom bracket and head tube are not sealed. With a little extra care the frame should stay nice, but ti would be a lot easier to (not) deal with. With your measurements it sounds like you'll get a much better fit with a custom geometry which should also give you better handling and ride characteristics.
I started riding a year ago after a 40 year break (I'm 54). I got a steel cyclocross bike for navigating the potholed streets of San Francisco (bike-friendly if you don't count homocidal motorists). After a year, feeling that top tube was much too short (with a 12 cm stem). I got a fitting at a pro shop and was told that a 52 cm seat tube and 57 cm top tube was what I needed (legs too short but they do rach the ground).....clearly in custom frame geometry territory. Using the conventional formulas also suggests a 52 seat and at least 57 top tubes.
I'm looking for a road bike that fits. I ride 75 miles a week in the AMs before work, along the ocean-- (salt/sand etc), and it is often moist (between October and April) here.
I test rode several bikes including a stock steel Mondonico and a few stock SEVENs, expensive but felt great, as nice as the steel bike. Of course the stock bikes didn't fit correctly. I borrowed an Aluminium and Carbon bike from friends and did not like the feel.
Any suggestions for a frame that far from stock size? Is the (only slightly) higher cost of Ti for a custom frame worth it? Any suggstions for frame builders?
Sandy
I don't know your budget, but Dean makes a ti frame thats $1200 +$200 for custom. Also, all Waterford Steel frames are custom geometry - custom cost is built in. Litespeed charges $500 for custom above the cost of the bike. Moots is an additional $400. Try also Serotta. My guess is you'll want the ti if you're riding in wet and salty conditions.
If you do not want to go custom you sound like a perfect size for a compact frame from a builder like Serrota or from Dean. You might want to take a look at them and see if you can fit to one.
