Clearing Vetta C500 Computer,,,?

Kenneth said:

Howdy,

I am back on my bike after seven years...

It has a Vetta C500 computer on it, and with a fresh battery, it is
working perfectly but for one hitch:

I can't figure out how to clear the trip ODO function.

This Vetta has a small triangular button near the top, and a larger
button closer to the rider. The larger button switches between
functions. The smaller causes the display to flash in all functions.

I know that there is a way to clear any one function, but, for now
(despite a fair amount of experimentation) I can't figure out how to
do it.

Might you assist?

Sincere thanks,

Hello again,

After posting above, to my surprise, I found a manual for this thing
online...

Thanks,

--
Kenneth

If you email... Please remove the "SPAMLESS."

Kenneth <[email hidden]> wrote in
news:[email hidden]:

Quoted message said:

Kenneth said:

Howdy,

I am back on my bike after seven years...

It has a Vetta C500 computer on it, and with a fresh battery, it is
working perfectly but for one hitch:

I can't figure out how to clear the trip ODO function.

This Vetta has a small triangular button near the top, and a larger
button closer to the rider. The larger button switches between
functions. The smaller causes the display to flash in all functions.

I know that there is a way to clear any one function, but, for now
(despite a fair amount of experimentation) I can't figure out how to
do it.

Might you assist?

Sincere thanks,

Hello again,

After posting above, to my surprise, I found a manual for this thing
online...

Thanks,

So for all of us out here who don't have a manual, how do you do it?

Steve Greenberg said:

Kenneth <[email hidden]> wrote in
news:[email hidden]:

Quoted message said:

Kenneth said:

Howdy,

I am back on my bike after seven years...

It has a Vetta C500 computer on it, and with a fresh battery, it is
working perfectly but for one hitch:

I can't figure out how to clear the trip ODO function.

This Vetta has a small triangular button near the top, and a larger
button closer to the rider. The larger button switches between
functions. The smaller causes the display to flash in all functions.

I know that there is a way to clear any one function, but, for now
(despite a fair amount of experimentation) I can't figure out how to
do it.

Might you assist?

Sincere thanks,

Hello again,

After posting above, to my surprise, I found a manual for this thing
online...

Thanks,

So for all of us out here who don't have a manual, how do you do it?

Howdy,

Here's the manual:

http://www.vetta.com/NewPDF/DP/C-500.1_uk.pdf

To clear the ODO:

Go to SPD/ATM mode, and then hold both buttons for a moment...

All the best,

--
Kenneth

If you email... Please remove the "SPAMLESS."