How often do the new Chorus BB's need to be replaced? Can they be serviced, or are they sealed units
like Ultegra that you just toss after a while? Also, any difference between the chorus and record
bb's, other than a piece of carbon?
Thanks!!
A community for cyclists, gear, training and racing.
Cycling Equipment · Public discussion
This thread is locked and is currently read-only.
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
How often do the new Chorus BB's need to be replaced? Can they be serviced, or are they sealed units
like Ultegra that you just toss after a while? Also, any difference between the chorus and record
bb's, other than a piece of carbon?
Thanks!!
"KB" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:How often do the new Chorus BB's need to be replaced? Can they be
serviced,
Quoted message said:or are they sealed units like Ultegra that you just toss after a while? Also, any difference
between the chorus and record bb's, other than a
piece
Quoted message said:of carbon?
You buy sealed bearings (~AU$35) from a bearing shop when it starts making dreadful noises. Mark Lee
"KB" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:How often do the new Chorus BB's need to be replaced? Can they be
serviced,
Quoted message said:or are they sealed units like Ultegra that you just toss after a while? Also, any difference
between the chorus and record bb's, other than a
piece
Quoted message said:of carbon?
I have a Record bb, which I've overhauled. It's not a simple procedure. The large (left side)
bearing slides off relatively easily with a few taps after removing the retaining ring, but the
smaller bearings on the right side take more persuasion (a bearing press) to remove.
The bearings are standard SKF cartridge bearings, and are quite cheap to replace once you've removed
them. I've pulled mine apart twice in two and a half years. First time I replaced the bearings,
second time I just cleaned it (with the right side bearings in place) in an ultrasonic tank, then
regreased it and put it back together. On reflection, a thorough clean was probably all it needed
the first time around, too.
Of course longevity depends on lots of things, such as how much you ride in the rain etc.
The Record bb differs from the Chorus in using an oversize lightened axle, and a carbon cover,
neither of which contribute to longevity, and only minimally to weight. Next time I buy one, I'll
buy Chorus.
Regards,
Suzy
--
---
Suzy Jackson [email hidden] suzyj.netsuzyj.netOpen ↗
KB-<< How often do the new Chorus BB's need to be replaced?
Not very often, long lasting, sealed bearings, not really servicable-Make sure the frameset is
prepped tho-BB faced.
<< Also, any difference between the chorus and record bb's, other than a piece of carbon?
The Record BB uses a oversized, thin walled spindle which is lighter and the Chorus is a thicker
walled, heavier spindle. The 'carbon' is just a crud guard, aluminum on Chorus.
Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene"
KB said:How often do the new Chorus BB's need to be replaced? Can they be serviced, or are they sealed
units like Ultegra that you just toss after a while? Also, any difference between the chorus and
record bb's, other than a piece of carbon?Thanks!!
My Record BB died after 14,000k. For about 20 dollars more(US)I went for the Phil Wood BB. I
couldn't recommend it highly enough. It makes Campy BBs look like junk. I like just about everything
Campy, but their BB and their chain (another long story) suck.
Kenny Lee
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.