rec.sport.unicycling · Public discussion

CHEST HIGH HANDLE FOR 36er.

Started by curbrider · · Last activity · 3 posts · 283 views

Thread details

What we know about this thread

Original section
rec.sport.unicycling
Published
20 May 2008
Last activity
22 May 2008
Original author
curbrider
Posts
3
Discussion status
Public discussion
Total views
283
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–3 of 3
Posts remain in their original chronological order.

Text size
  1. Hi Everyone,
    Long time reader, first time thread starter.
    But I have not seen any info on this below.

    I found a video of a 2 riders Dustin and Alexander from the Netherlands
    both using chest high 36er handles.
    The best (but poor) detail that I have is this screen capture:
    [image:
    http://www.unicyclist.com/forums/attachment.php?attachmentid=26769&stc=1&d=1211263269]

    or you can see the whole video (not in English) at:
    http://www.vimeo.com/836861

    or an article in English with some translation of the video (but no
    comments about the handle)(Scroll towards bottom) at:
    http://ridethelobster.wordpress.com/

    My questions: Is this an advantage😕 ?
    Wouldn't this make UPDs too dangerous :eek: ?
    Did I give away the Netherlands RTL secret weapon 😄 ?
    Who is going to make/try one and share 🙂 ?

    Not me, Mark (Curbrider), in answer to the last question.
    I am very new to 36 inch riding and still trying out my purple T7
    handle. I'm not yet comfortable with high speed. My knees have a bit
    of pain so for now I ride with 170 mm cranks which helps in m
    Posted Via Usenet.com Premium Usenet Newsgroup Services
    ----------------------------------------------------------
    http://www.usenet.com

  2. curbrider said:


    My questions: Is this an advantage😕 ?
    Wouldn't this make UPDs too dangerous :eek: ?
    Did I give away the Netherlands RTL secret weapon 😄 ?
    Who is going to make/try one and share 🙂 ?

    Not me, Mark (Curbrider), in answer to the last question.
    I am very new to 36 inch riding and still trying out my purple T7
    handle. I'm not yet comfortable with high speed. My knees have a bit
    of pain so for now I ride with 170 mm cranks which helps in my case.
    I'm tall. And staying away from curb drops for now.
    My goal is for some commuting to work 4 miles each way.
    🙂

    1) I believe it is an advantage for stability purposes and for riding
    straight, as with any handle, but I do not think a handle this high is
    ideal.
    2) UPDs would seem to be more dangerous, but as I have not tried a
    handle like this I am not sure.

    The ideal uni set up changes for each person, which means there are a
    lot of different handle set ups people are trying. I like tucking in
    further down than a high handle would allow, and having a handle close
    to the front of your saddle makes it easier to pull up on uphills. A
    high handle like in the video seems like it would make climbing
    awkward...but once again...I am not an expert on that kind of handle
    set up.

    I think the T7 will work better for you than a set up like in the
    video. I would stick with that for a while. I have a GB4 handle (not
    sold anymore) that doesn't sit as far out as the T7 and I love it. I
    can't imagine riding with a different handle set up, and I find myself
    riding very similar to Ken now at a tucked in position.

    Riding 4 miles on your 36er to work is VERY doable (or totally doable
    as some would say on this forum 😄 ). Aspen Mike used to solely use
    170mm cranks on his 36er and he is able to cover quite a large amount
    of distance. Stick with your current set up for now and you should be
    comfortable riding 8 miles a day to/from work. After you get
    comfortable with the 170s, I would highly recommend switching to 150mm
    cranks (or smaller) if you are going to be commuting. If you have any
    other commuting questions feel free to ask, as we have a number of uni
    commuters on this board.

    --
    siafirede

    'DCuni' (http://www.dcuni.com/blog) - my blog about Unicycling in
    Washington DC, Virginia, Maryland

    James = my name
    'This' (http://www.myspace.com/clawsout) = my myspace
    ------------------------------------------------------------------------
    siafirede's Profile: http://www.unicyclist.com/profile/6057
    View this thread: http://www.unicyclist.com/thread/70080

    Posted Via Usenet.com Premium Usenet Newsgroup Services
    ----------------------------------------------------------
    http://www.usenet.com

  3. They seem to be pedaling along pretty good. It's maybe that they can
    weight the bars more this way, because the weight going into the arms
    is closer to the seatpost balance point, then when the bars are lower
    and to the front. You can't displace as much weight further forward,
    without tipping forward.

    I think it is a mistake to compare this handle to closely to Pete's
    guni. These are for a standard frame. Pete's guni had a special frame
    that put the seat rearward, that allowed a more forward handle
    placement.

    Safety wise, in the grand tradition of racing, people won't sweat
    safety if it's really a faster setup.😄

    Actually, it looks more of a threat to my wallet then to my health.
    That much pipe will be expensive and fragile, if it is really light.😉

    --
    feel the light
    ------------------------------------------------------------------------
    feel the light's Profile: http://www.unicyclist.com/profile/14551
    View this thread: http://www.unicyclist.com/thread/70080

    Posted Via Usenet.com Premium Usenet Newsgroup Services
    ----------------------------------------------------------
    http://www.usenet.com

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.