Cheap tandem

"Tim Steele" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Courtesy of another uk.rec.cycling person we are now the proud owners of

an

Quoted message said:

Ammaco Other Half MTB tandem.

OK, it's a bit basic, and a friend who is very knowledgeable seems to

think

Quoted message said:

the most worrying aspect of it is the back wheel which might collapse. It looks very much like a
standard 26" MTB rear wheel with a cheap hub, screw-on 6 speed freewheel, alloy rim and basic
spokes. The simplest

upgrade

Quoted message said:

would be to replace the spokes with stainless.. what do u.r.c readers

think?

Quoted message said:

Tim

Actually I believe stainless spokes are less strong than ordinary steel spokes; their advantage is
in corrosion resistance.

Depends how heavy the riders are. A new hub and wheel with more spokes would be the first
upgrade to try.

"Orienteer" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

"Tim Steele" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Courtesy of another uk.rec.cycling person we are now the proud owners of

an

Quoted message said:

Ammaco Other Half MTB tandem.

OK, it's a bit basic, and a friend who is very knowledgeable seems to

think

Quoted message said:

the most worrying aspect of it is the back wheel which might collapse.

It

Quoted message said:

Quoted message said:

looks very much like a standard 26" MTB rear wheel with a cheap hub, screw-on 6 speed freewheel,
alloy rim and basic spokes. The simplest

upgrade

Quoted message said:

would be to replace the spokes with stainless.. what do u.r.c readers

think?

Quoted message said:

Tim

Actually I believe stainless spokes are less strong than ordinary steel spokes; their advantage is
in corrosion resistance.

Depends how heavy the riders are. A new hub and wheel with more spokes

would

Quoted message said:

be the first upgrade to try.

Actually a PROPERLY built wheel is a first try. And you might not get this even from a fairly
respected bike shop (I didn't).

I'm not sure about that freewheel, would it be possible to get something built on a 36H 7 speed
cassette hub with the same OLN. I'd bet its only 130mm.

Perhaps the best plan is to keep this bike away from loaded touring, and only use it for localish
trips. I've got a low price Orbit and I'm bothered that I;m throwing good money after bad.

"Tim Steele" <[email hidden]> wrote in message
news:<[email hidden]>...

Quoted message said:

a friend who is very knowledgeable seems to think the most worrying aspect of it is the back wheel
which might collapse. It looks very much like a standard 26" MTB rear wheel with a cheap hub,
screw-on 6 speed freewheel, alloy rim and basic spokes. The simplest upgrade would be to replace
the spokes with stainless.. what do u.r.c readers think?

26" wheels are pretty tough - have you counted the spokes? I have a triplet with 48-spoke 26"
wheels. Sir Robin of Bridgewater is a Big Fan of 26" tandem wheels.

Screw-on freeweheel is not in itself a bad thing - after all, you don't need to replace it until it
wears out :-)

I would check that all the spokes have even tension, and if not get it retensioned by a good
wheelbuilder. That makes far more difference than material or number of spokes, IME - again, if
you ride and never break a spoke, why worry - and if you break a spoke first time out then you
need to Do Stuff.

Me, I'd be inclined to try a few modest rides and see what rattles.