Chain and pin

Giovanni said:

I have a shimano lx (hg73) chain on my first mtb, as i have to reinstall it on the bike i don't
know if i'm going right or wrong. The chain is cut in the right lenght as the bike, before being
brought to me, has done yet some miles. Now i have the chain and two pins, these two pins are
longer than the chain width and they also show a cut around the body that, to me, could mean that
once into the chain they have to be broken but it's my idea and before destroying something i
would like someone to tell me if i'm right. I posted a picture of the chain, the pin and some
strange things i have no idea what they could be on
bike-board.netviewtopic.phpOpen ↗

Thanks for your support

parktool.comFAQchnRe.shtmlOpen ↗ Scroll down to Procedure for Shimano chain.

As far as I know you will need a chaintool.

--
Perre

You have to be smarter than a robot to reply.

Quoted message said:

parktool.comFAQchnRe.shtmlOpen ↗ Scroll down to Procedure for Shimano chain.

As far as I know you will need a chaintool.

--

I have the chaintool but what i missed was your site suggestion, W O N D E R F U L

Thanks a lot, hope to solve the brake problem and to go 4 a ride

giovanni

Giovanni said:

Quoted message said:

parktool.comFAQchnRe.shtmlOpen ↗ Scroll down to Procedure for Shimano chain.

As far as I know you will need a chaintool.

--

I have the chaintool but what i missed was your site suggestion, W O N D E R F U L

Thanks a lot, hope to solve the brake problem and to go 4 a ride

giovanni

Prego.

--
Perre

You have to be smarter than a robot to reply.