Cycling Equipment · Public discussion

Cateye Astrale 8

Started by ds0709 · · Last activity · 5 posts · 1,329 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
25 June 2004
Last activity
25 June 2004
Original author
ds0709
Posts
5
Discussion status
Public discussion
Total views
1,329
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. Anyone have the same issue?

    I have just switched from a 30 spoke rear to a 20 spoke rear and for some reason, when I go hard uphill only my Astrale 8 starts to read very funny, it does not read speed correct at all, in fact, it is all over the scale, one turn of the pedals it will say 14 the next 3 the one after that 9 miles per hour.

    Now the cadence reads correct as this is a different monitor. The funny thing is, I kept the same magnet from a previous Cateye on the old rim but on the new one I put the magnet that came with the Astrale 8.

    Any ideas??

    Thanks to all that reply!!

  2. Perhaps just a coincidence with replacing the wheel and your battery needs replacing (if wireless). Sounds like symptoms I have when wireless transmitter battery is dying.

  3. It does seem that it might be a coincidence, but you might also check the space between the magnet and sensor and also the fore aft positioning of the two - they may have moved a bit out of range when you changed wheels.

  4. Quoted post said:

    Originally posted by ds0709
    Anyone have the same issue?

    I have just switched from a 30 spoke rear to a 20 spoke rear and for some reason, when I go hard uphill only my Astrale 8 starts to read very funny, it does not read speed correct at all, in fact, it is all over the scale, one turn of the pedals it will say 14 the next 3 the one after that 9 miles per hour.

    Now the cadence reads correct as this is a different monitor. The funny thing is, I kept the same magnet from a previous Cateye on the old rim but on the new one I put the magnet that came with the Astrale 8.

    Any ideas??

    Thanks to all that reply!!

    Reset the meter. Chances are you moved the magnet a bit, and its memory needs a good cleaning.

  5. Quoted post said:

    Originally posted by ds0709
    Anyone have the same issue?

    I have just switched from a 30 spoke rear to a 20 spoke rear and for some reason, when I go hard uphill only my Astrale 8 starts to read very funny, it does not read speed correct at all, in fact, it is all over the scale, one turn of the pedals it will say 14 the next 3 the one after that 9 miles per hour.

    Now the cadence reads correct as this is a different monitor. The funny thing is, I kept the same magnet from a previous Cateye on the old rim but on the new one I put the magnet that came with the Astrale 8.

    Any ideas??

    Thanks to all that reply!!

    You may find the lower spoke wheel is flexing more than your old wheel, moving the magnet away from the sensor when you apply increased pressure to the pedals.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.