CyclingForums
A community for cyclists, gear, training and racing.
Cycling Equipment · Public discussion
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
As posted earlier, I'm trying to convert to 700c from 27" on an old lugged trek touring frame.
Besides the vertical spacing issue, I'm having trouble with width of the canti bosses on the front
and rear. The front is 60mm and the rear 70mm. The original brakes were Dia Compe 960 Grand tour.
Anyone know of any modern V or Canti's that would work with the close together studs? (and ideally
have a lot of vertical adjustment)
"Jonathan Kaplan" <[email hidden]> wrote in message
"]news:[email hidden]...
Quoted message said:As posted earlier, I'm trying to convert to 700c from 27" on an old lugged trek touring frame.
Besides the vertical spacing issue, I'm having trouble with width of the canti bosses on the front
and rear. The front is 60mm
and
Quoted message said:the rear 70mm. The original brakes were Dia Compe 960 Grand tour.
Anyone know of any modern V or Canti's that would work with the close together studs? (and ideally
have a lot of vertical adjustment)
Maybe some Avid Tri-Aligns or Onza HOs??
Mike
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.