Cycling Equipment · Public discussion

Cane Creek S-5 Getting Tighter

Started by sansabar · · Last activity · 4 posts · 872 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
19 July 2005
Last activity
20 July 2005
Original author
sansabar
Posts
4
Discussion status
Public discussion
Total views
872
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. I'm new to the forum and to the Cane Creek headset.

    I recently purchased a used LeMond Buenos Aires with a Cane Creek S-5 headset. After putting about 30 miles on the bike I have noticed that the steering has become very deliberate and has very little free movement. It is as if the headset is tightening on its own. Anyone have a similar problem or a solution for this?

    The bike is immaculate, used not abused, and was turning freely when I first put it to the road.

    Thanks in advance for any input or help.

    Scott

  2. sansabar said:

    I'm new to the forum and to the Cane Creek headset.

    I recently purchased a used LeMond Buenos Aires with a Cane Creek S-5 headset. After putting about 30 miles on the bike I have noticed that the steering has become very deliberate and has very little free movement. It is as if the headset is tightening on its own. Anyone have a similar problem or a solution for this?

    The bike is immaculate, used not abused, and was turning freely when I first put it to the road.

    Thanks in advance for any input or help.

    Scott

    HS don't self tighten. repair section at www.parktool.com has the drill on em.If you don't know what you are doing,take it to LBS.

  3. boudreaux said:

    HS don't self tighten. repair section at www.paktool.com has the drill on em.If you don't know what you are doing,take it to LBS.

    Thanks for the advice. I'm guesing you meant www.parktool.com. I'll jump in and see if I can't find why it has gotten tighter.

  4. For what it's worth I solved my problem. I didn't realize that the two stem bolts are where the tube tension was managed. I guess that the bolts were not tight enough and were allowing the stem to tighten up while riding. Took me a less than five minutes to reset and adjust the headset once I learned how it worked. Thanks again for the help.

    Scott

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.