Cycling Equipment · Public discussion

Campy Mix-and-Match ???

Started by David Hallerman · · Last activity · 4 posts · 867 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
20 February 2003
Last activity
21 February 2003
Original author
David Hallerman
Posts
4
Discussion status
Public discussion
Total views
867
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. Hi,

    I'm thinking of putting together a Campy drivetrain in a mix-and-match fashion, with some parts I
    have already and some I'd buy, and I wonder if it would work.

    WHAT I HAVE
    * Campy Racing-T crank, 50/40/30 (8-speed era)
    * Campy ACH bottom bracket, either 111mm or 115mm
    * Campy Racing-T front derailleur (8-speed era)
    * brake calipers either Shimano Ultegra (current) or single-pivot Dura-Ace (older)

    WHAT I'D BUY
    * Chorus Ergo brifters (10-speed)
    * Record rear derailleur, long cage (10-speed)
    * Chorus or Record cassette, 13x29 (10-speed)
    * Chorus hubs (10-speed) on new wheelset
    * Wippermann stainless steel chain (9/10 speed)

    Would this mix work? Would any brake calipers work well with Ergo, or should I get Chorus, say? And
    I've heard the Wippermann chain works better with 10 speed than Campy's own...true?

    All suggestions, experiences, ideas, opinions welcomed.

    David Hallerman
    ------------------------
    [email hidden]

  2. (David Hallerman) said:

    WHAT I HAVE
    * Campy Racing-T crank, 50/40/30 (8-speed era)
    * Campy ACH bottom bracket, either 111mm or 115mm
    * Campy Racing-T front derailleur (8-speed era)
    * brake calipers either Shimano Ultegra (current) or single-pivot Dura-Ace (older)

    WHAT I'D BUY
    * Chorus Ergo brifters (10-speed)
    * Record rear derailleur, long cage (10-speed)
    * Chorus or Record cassette, 13x29 (10-speed)
    * Chorus hubs (10-speed) on new wheelset
    * Wippermann stainless steel chain (9/10 speed)

    I think that it will work fine. I might consider a Shimano 9sp chain for the 8sp rings. You needn't
    spend that much $ on the Record derailleur, the 2003 Centaur is the same length.

    I question the need for 3x10 and enjoy the flexibility that I get by staying with 9sp.

  3. David-<< WHAT I HAVE
    * Campy Racing-T crank, 50/40/30 (8-speed era)
    * Campy ACH bottom bracket, either 111mm or 115mm
    * Campy Racing-T front derailleur (8-speed era)
    * brake calipers either Shimano Ultegra (current) or single-pivot Dura-Ace (older)

    WHAT I'D BUY
    * Chorus Ergo brifters (10-speed)
    * Record rear derailleur, long cage (10-speed)
    * Chorus or Record cassette, 13x29 (10-speed)
    * Chorus hubs (10-speed) on new wheelset
    * Wippermann stainless steel chain (9/10 speed)

    Would this mix work? Would any brake calipers work well with Ergo, or should I get Chorus, say? And
    I've heard the Wippermann chain works better with 10 speed than Campy's own...true?

    It will work fine, any brake caliper will work altho the new Chorus are really nice. The Wipperman,
    IRD or Campagnolo 10s chain, the last using an IRD snaplink, will work fine, The cheapest and very
    functional one is the IRD-

    Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
    (303)440-3535 vecchios.comvecchios.com "Ruote convenzionali costruite eccezionalmente bene"

  4. paul-<< I might consider a Shimano 9sp chain for the 8sp rings.

    This isn't necessary. I have used a 10s chain on even 7400 Dura Ace rings as well as 1995 Athena,
    works fine-

    Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
    (303)440-3535 vecchios.comvecchios.com "Ruote convenzionali costruite eccezionalmente bene"

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.