Campy 8s-10s Hub Conversion

Quoted message said:

Al Frost [email hidden] Writes:

Quoted message said:

I have a pile of 8spd Campy hubs. Anyway to make them 10spd
compatable?

Also have a CC8 Mavic hub. Anyway to make it 10spd
compatable?

I beleive the Campy hubs can be converted to 9/10 speed by
changing the freehub body to the later '98 freehub . You may
also need to change the axle. Perhaps one of the Campy
experts like Peter will chime in here.

super-<< I have a pile of 8spd Campy hubs. Anyway to make
them 10spd compatable?

Also have a CC8 Mavic hub. Anyway to make it 10spd
compatable? >><BR><BR>

The Campagnolo one can be converted using a 1997/8
Campagnolo 9s freehub body, but those are really scarce.

The Mavic can be converted to shimano 9s, where you can use
a shimano 10s or American Classic 10s cogset.

Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St.
Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali
costruite eccezionalmente bene"

In article <[email hidden]>, Al Frost

Quoted message said:

I have a pile of 8spd Campy hubs. Anyway to make them
10spd compatable?

Also have a CC8 Mavic hub. Anyway to make it 10spd
compatable?

You can use the freehubs that are on todays
Veloce/Mirage hubs.

If you have Record/Chourus you must attach a (i think 11mm)
ring so that the 9/10 freehub stay in place.

Myself I have converted some Record/Chourus/Athena 8spd
to 10 speed.

If you wan't the exact dimensions of the ring, I'll take of
the freehub and measure.

--
// Jesper Bröndum // [email hidden]

In article <[email hidden]>,

Al Frost said:

I have a pile of 8spd Campy hubs. Anyway to make them 10spd
compatable?

As of last year Branford Bike sold Campagnolo 9 speed
freehubs which would fit 8-speed hubs. Price was $80 for
Record Titanium or Chorus.

I also needed a second flat washer FH-RE017 (8-speed hubs
had one, 9-speed hubs had two) for a campy 9 speed chain on
the small cog to clear my drop out.

10-speed shares the same spline pattern.

--
<a href="poohsticks.orgdrewOpen ↗">Home Page</a