Campag Mirage brake release

On Tue, 20 May 2003 15:48:39 +0100, "Neale" <[email hidden]> wrote

Quoted message said:

Can someone please tell me how one releases the brakes for wheel removal.

Cheers

I think you may find a small pin on the top of the moving part of the brake lever which you push in
and it allows the lever to open a couple of degrees further.

Bob.

Bob Muir <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

On Tue, 20 May 2003 15:48:39 +0100, "Neale" <[email hidden]> wrote

Quoted message said:

Can someone please tell me how one releases the brakes for wheel removal.

Cheers

I think you may find a small pin on the top of the moving part of the brake lever which you push
in and it allows the lever to open a couple of degrees further.

Bob.

I think that too!

If you look at: campagnolo.com03 GR MIRAGE.jpgOpen ↗

you will see the button protruding from the lever...it's the only visible silver bit (just below
where it says 9 Speed).

HTH.

--
Mark
____________________________
Practice does not make perfect... Perfect practice makes perfect

---
Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (grisoft.comgrisoft.comOpen ↗).
Version: 6.0.481 / Virus Database: 277 - Release Date: 13/05/03

"Neale" <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

Can someone please tell me how one releases the brakes for wheel removal.

There's a little round button on each brake lever (at the top near where the Campag logo is); push
it across and you should find that the lever goes a little further back into the housing and the
cable slackens off. From memory, these should be easy to find on Mirage levers as the metal button
stands out from the black plastic lever.

David E. Belcher

Dept. of Chemistry, University of York