Recumbent bicycles · Public discussion

Brake Pad ?

Started by To Father Time · · Last activity · 5 posts · 745 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
Recumbent bicycles
Published
19 August 2003
Last activity
21 August 2003
Original author
To Father Time
Posts
5
Discussion status
Public discussion
Total views
745
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. My rear brake is an Avid Speed Dial 7.

    What is a recommended replacement brake pad that will work ?

    Is there a standard for brake pad interchangeability?

    ---
    Thank you very much,

    Father Time

  2. I replaced my worn Avid brake pads with Shimano pads (because that's what the LBS had in stock) and
    regret it. Seems like the Shimano pads attract and hold every bit of grit that touches my wheel. And
    then uses that grit to grind the sidewalls of my front rim. See if you can find CoolStops or
    something similar.

    <Chas> Haluzak Hybrid Race -- the inline wheelchair

    "to Father Time" <[email hidden]> wrote in message
    news:Q4p0b.200516$YN5.140454@sccrnsc01...

    Quoted message said:

    My rear brake is an Avid Speed Dial 7.

    What is a recommended replacement brake pad that will work ?

    Is there a standard for brake pad interchangeability?

    ---
    Thank you very much,

    Father Time

  3. Chas said:

    I replaced my worn Avid brake pads with Shimano pads (because that's what the LBS had in stock)
    and regret it. Seems like the Shimano pads attract and hold every bit of grit that touches my
    wheel. And then uses that grit to grind the sidewalls of my front rim. See if you can find
    CoolStops or something similar.

    Note that factory-stock SRAM pads also make great rim grindstones. Tektro pads have worked far
    better for me than the stock ones.
    --
    Russ [email hidden] the wabbit to despam
    A. Because it destroys the natural flow of conversation.
    B. What's wrong with top posting ?

  4. Russ Price <[email hidden]> wrote in message
    news:<qtC0b.155325$Oz4.43258@rwcrnsc54>...

    Quoted message said:
    Chas said:

    I replaced my worn Avid brake pads with Shimano pads (because that's what the LBS had in stock)
    and regret it. Seems like the Shimano pads attract and hold every bit of grit that touches my
    wheel. And then uses that grit to grind the sidewalls of my front rim. See if you can find
    CoolStops or something similar.

    Note that factory-stock SRAM pads also make great rim grindstones. Tektro pads have worked far
    better for me than the stock ones.

    Amen. I haddn't known the SRAMs were a problem, but not 10 minutes ago a friend stopped by with a
    2002 Rocket with the rims deeply scored from the SRAM pads. Less than 1000 miles on the bike.

    I install a lot of Shimano V brakes, but I always replace the pads with Kool Stop. I've a small pile
    of unused Shimano pads.

    This is the 1st I'd heard that the Tectros were OK. They look like the same junk.

  5. Mark Stonich said:


    Amen. I haddn't known the SRAMs were a problem, but not 10 minutes ago a friend stopped by with a
    2002 Rocket with the rims deeply scored from the SRAM pads. Less than 1000 miles on the bike....

    The stock SRAM 5.0 pads on my 1999 RANS Wave and the 7.0 pads on my 2000 RANS Rocket both ended up
    with embedded debris in them after only a couple of hundred miles. 🙁

    Tom Sherman - Quad Cities USA (Illinois side)

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.