oes different brake blocks make a difference to stoping quicker ,my braking could be alot better have to pull hard down hill to stop more than last bike is the braking mechanism more important than the blocks themselves for effecent braking....🙁
Road Cycling · Public discussion
brake blocks
This thread is locked and is currently read-only.
Thread details
What we know about this thread
- Original section
- Road Cycling
- Published
- 21 October 2009
- Last activity
- 25 October 2009
- Original author
- hod65
- Posts
- 5
- Discussion status
- Public discussion
- Total views
- 2,241
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
There are definitely brake pads with better and worse compounds for different conditions but the brakes themselves can also be the culprit as can the rims.
Are you talking about caliper style road bike brakes. If so are they similar in design and adjustment to your other brakes?
If you're talking cantilever style 'cross or touring bike brakes then the design and setup can vary dramatically. With cantilever's you have to make a tradeoff between braking power and wide open clearance for mud and such. The design of the brakes themselves can be the limiting factor but the characteristics can be changed quite a bit by shortening or lengthening the straddle cable. The shorter the straddle cable the more braking power you'll get but you'll pay for it with reduced mud clearance if that's a concern.
But if you can't make any adjustments then yes, you can get better brake compounds and replacement 'blocks' or complete replacement 'shoes' depending on the style of your brakes and whether the blocks can be slid out and replaced.
Sounds like a good time to roll your bike down to you LBS to see what they can do for you.
Good luck,
-Dave -
daveryanwyoming said:
There are definitely brake pads with better and worse compounds for different conditions but the brakes themselves can also be the culprit as can the rims.
Are you talking about caliper style road bike brakes. If so are they similar in design and adjustment to your other brakes?
If you're talking cantilever style 'cross or touring bike brakes then the design and setup can vary dramatically. With cantilever's you have to make a tradeoff between braking power and wide open clearance for mud and such. The design of the brakes themselves can be the limiting factor but the characteristics can be changed quite a bit by shortening or lengthening the straddle cable. The shorter the straddle cable the more braking power you'll get but you'll pay for it with reduced mud clearance if that's a concern.
But if you can't make any adjustments then yes, you can get better brake compounds and replacement 'blocks' or complete replacement 'shoes' depending on the style of your brakes and whether the blocks can be slid out and replaced.
Sounds like a good time to roll your bike down to you LBS to see what they can do for you.
Good luck,
-Dave
road bike brakes.tried out some inserts at the levers think have improved grip for me allso my fingers seem to be getting stronger than when i first started ..found them very odd to use after hybrid bike which had 'normal' brakes ......cheers -
Your hybrid may very well have V-Brakes as well which have far more stopping power than the average road caliper. Did your hybrid brakes look like this:
http://bikes.jump-gate.com/files/images/v-brakes.jpgIt sounds like you're on the right track regardless.
Good luck,
-Dave -
Kool-Stop Salmon pads.
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.