Basic newbie gear question.

Maui7301 said:

Hi,
I'm new to triathlons, I recently bought a frame and I'm going to start
building my 1st tri-bike.
I'll buy a Shimano Ultegra cassette and crankset and I got a little
confused.
For the cassette, what combination do you recommend? and what's the
difference between them? 11-23, 12-24, 12-25, etc.
And for the crankset, I'm 182cm (or 5'11.9" almost 6'😉. Which lenght
should I get? 170, 172.5, 175. My inseam is 80cm.

Thanks for your help
Maui

Depends on your riding style, I am a big gear pusher at slow RPM so I
ride a 54/45 on the front and a 10-21 on the back but 11-23 is a pretty
typical spread for a "race" cassette if the races you do are hillier
(not typical in triathlons) you may want a 12-24 but I see no reason to
get a 12-25 unless you have a large single ring in the front (56 single
or something crazy)

I don't know a lot about crank lengths but I am 6'3" with a similar
inseam and I have a 175 that works well for me.

hope this helps

"Maui7301" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Hi,
I'm new to triathlons, I recently bought a frame and I'm going to start
building my 1st tri-bike.
I'll buy a Shimano Ultegra cassette and crankset and I got a little
confused.
For the cassette, what combination do you recommend? and what's the
difference between them? 11-23, 12-24, 12-25, etc.
And for the crankset, I'm 182cm (or 5'11.9" almost 6'😉. Which lenght
should I get? 170, 172.5, 175. My inseam is 80cm.

Thanks for your help
Maui

You don't say what experience you have riding or maintaining, but from the
questions I'm guessing that you've not messed around building many bikes.
Your riding style and the terrain you ride on are the big factors here.

If you've already got a bike, use that as a template. Note the gears you
use at the moment and try and reproduce those ratios. If not, I'd suggest
getting to a nice local bike shop and trying stuff out. Once you factor in
the tools you'll likely need and the help they can provide it may well prove
best to go with a shop built machine.

I know that's probably not what you want to hear, but prescribing something
given the info above would be wrong.

Skippy
E&OE

"Maui7301" <[email hidden]> schreef in bericht
news:[email hidden]...

Quoted message said:

Hi,
I'm new to triathlons, I recently bought a frame and I'm going to start
building my 1st tri-bike.
I'll buy a Shimano Ultegra cassette and crankset and I got a little
confused.
For the cassette, what combination do you recommend? and what's the
difference between them? 11-23, 12-24, 12-25, etc.
And for the crankset, I'm 182cm (or 5'11.9" almost 6'😉. Which lenght
should I get? 170, 172.5, 175. My inseam is 80cm.

Thanks for your help
Maui

For crankset 175 is average. So if you can't compute the correct lenght
assume 175 mm.

For cassette an advice is hard to give. I live in Holland which is almost
flat. 11-23 or 12-24 will do fine. Choosing the right cassette is a question
of who you are as a rider and where your ride. In general, if you're a
beginner, you should keep options open and therefore choose 12-25 which in
general will be OK. Practise will learn you what is good for you

b,ert