Hi guys I've just purchased the new Deore Hollowtech 2 crank, and was after some advice over a bashring to protect it. Its the 44 32 22T model, any ideas?
Thanks Guys,
Matthew
Cycling Equipment · Public discussion
Bashring for a 44, 32, 22T Crank
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 15 January 2010
- Last activity
- 16 January 2010
- Original author
- matthewhaigh
- Posts
- 3
- Discussion status
- Public discussion
- Total views
- 1,123
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
matthewhaigh said:
Hi guys I've just purchased the new Deore Hollowtech 2 crank, and was after some advice over a bashring to protect it. Its the 44 32 22T model, any ideas?
Because I did not know that you could put a bashring on a triple, if I were planning on grinding on logs/etc. then I would replace the existing 44t chainring with a STEEL chainring ...
Alternatively, I would move the 44t to the inner shoulder & install a larger granny (is a 28t-or-larger 64BCD chainring available?) leaving the outer shoulder for the bashring.
-
alfeng said:
Because I did not know that you could put a bashring on a triple, if I were planning on grinding on logs/etc. then I would replace the existing 44t chainring with a STEEL chainring ...
Alternatively, I would move the 44t to the inner shoulder & install a larger granny (is a 28t-or-larger 64BCD chainring available?) leaving the outer shoulder for the bashring.
Yeah good point, thanks for the help, ill go for the steel ring sounds like a more pratical idea
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.