I am going in crazy circles trying to find some bars for my Felt DA. It's an older model with a very specific bayonet clamp that only comes in the 26.0mm size.
Can anyone help me out with some standard clamp models that are UCI approved ... and super fast / pro looking?
Some more specs if you want an extra challenge: 38-42cm base bar width 10cm between aero bars Aero bars straight or slight kick up 16cm between pads centre-to-centre (approx.) 2.5cm from centre of clamp to height of pads Internal cabling and no integrated breaks (I am running DI2)
Oval Concepts, more options than you can poke a stick at.
I assume that by "integrated brakes" you mean brake levers which come as a part of the bar. Do you mean that you will be trying to run road levers on the bullhorns?
I am going in crazy circles trying to find some bars for my Felt DA. It's an older model with a very specific bayonet clamp that only comes in the 26.0mm size.
Can anyone help me out with some standard clamp models that are UCI approved ... and super fast / pro looking?
That is mechanical doping, if they're any good you'll find them on the banned list the following year.
Oval Concepts, more options than you can poke a stick at.
I assume that by "integrated brakes" you mean brake levers which come as a part of the bar. Do you mean that you will be trying to run road levers on the bullhorns?
Had a look at Oval and the A921 ticks most of the boxes except it looks like it has an attached standard stem. I have a bayonet stem so I just need the bars with the 26mm. It also has integrated breaks.
Yes I do mean 'no integrated break levers' as the DI2 system has gear buttons and breaks in one mechanism on the base bar, and of course gear buttons on the aero bars. (It's sooooo good!)
Not sure I'm understanding what you're looking for but I run an FSA Vision base bar (26mm), and they have shims to allow any standard diameter extensions you want to mount on them (I run Profile T2+ with shims).
