Speaking of standards, any recommendations of drop bars that will work in a
25.4mm stem?
LBS sells 3T (3TTT?) but they appear to be 25.8. Sheldon says this might work - anybody got any
experience with this?
cheers, clive
UK and Europe · Public discussion
25.4mm drop bars
This thread is locked and is currently read-only.
Thread details
What we know about this thread
- Original section
- UK and Europe
- Published
- 12 August 2003
- Last activity
- 13 August 2003
- Original author
- Anonymous
- Posts
- 2
- Discussion status
- Public discussion
- Total views
- 693
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
Clive George said:
Speaking of standards, any recommendations of drop bars that will work in a
25.4mm stem?Not recommendations but 25.4 drop bars are still available from
sjscycles.comvIndex.htmOpen ↗Quoted message said:
LBS sells 3T (3TTT?) but they appear to be 25.8. Sheldon says this might work - anybody got any
experience with this?It might work but it's bad practice to mismatch by more than 0.2mm. Stem would be in danger of not
clamping correctly and may fail or get damaged. I would not risk it and get a new stem instead so
good modern bars can be used.Most current 3T and ITM drop bars are 25.8. Most other decent drop bars are now 26.0.
~PB
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.