23.8 mm seatpost

It might be possible to have a machine shop turn down a larger post to 23.8
mm. should you not find a post to suit you.

"[email hidden]" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

I have an old Peugeot with a 23.8 mm seatpost. After Googling, I
realize how rare these things are. Does anyone know where to buy one?

Tom

Scott Gates said:

It might be possible to have a machine shop turn down a larger post
to 23.8 mm. should you not find a post to suit you.

"[email hidden]" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

I have an old Peugeot with a 23.8 mm seatpost. After Googling, I
realize how rare these things are. Does anyone know where to buy
one? Tom

It would be extremely difficult, as the smallest aluminum seatpost I could
find was a 25.0mm and the walls would not likely be thick enough to machine
to size. However, there are steel seatposts without clamping heads with
diameters smaller than yours. You could then use a shim to increase the
diameter to fit. Check your LBS to see if they can order some of these.
--
Phil, Squid-in-Training

In message <[email hidden]>, Scott Gates
<[email hidden]> writes

Quoted message said:

It might be possible to have a machine shop turn down a larger post to 23.8
mm. should you not find a post to suit you.

"[email hidden]" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

I have an old Peugeot with a 23.8 mm seatpost. After Googling, I
realize how rare these things are. Does anyone know where to buy one?

Tom

Turning down a 27mm alloy seatpost to 23.8mm could leave the walls a bit
thin.

You could shim a 22.2mm (7/8"😉 BMX 'post.

such as:

http://www.xoutfitters.com/bmx/seatpost/

For plenty more, possibly even one near you, google:

22.2 BMX seatpost

--

Martyn Aldis, e-mail [email hidden]
==============================================================================