15 watt halogen - Battery?

Check out the battery, if it is a Sealed Lead Acid type, you can buy a new one at Jaycar
electronics. Mine cost about $20 for a Cateye Daylites battery. Just take along your old battery and
buy another one with the same rating.

Dave Os "ram" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I have an old (ca. 1997-98) Nite Rider headlight that has given me many years of good use.
Unfortunately, due to a freak accident, I destroyed the battery to run it with. A new battery from
Nite Rider is priced at a whopping $160, which I don't really have. Is there a DIY way to build a
battery pack to run this bulb? I still have the original jack that fits into the light, can I hook
it up to some NiMH batteries from radio shack and get it to run? What kind of voltage and
amp-hours should I be shooting for? I believe that I can find a way to construct a battery pack
that straps onto the frame, and leaves the cells removable for recharging. Thanks in advance for
your advice on this matter.

David Oslington said:

Check out the battery, if it is a Sealed Lead Acid type, you can buy a new one at Jaycar
electronics. Mine cost about $20 for a Cateye Daylites battery. Just take along your old battery
and buy another one with the same rating.

Dave Os "ram" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I have an old (ca. 1997-98) Nite Rider headlight that has given me many years of good use.
Unfortunately, due to a freak accident, I destroyed the battery to run it with. A new battery from
Nite Rider is priced at a whopping $160, which I don't really have. Is there a DIY way to build a
battery pack to run this bulb? I still have the original jack that fits into the light, can I hook
it up to some NiMH batteries from radio shack and get it to run? What kind of voltage and
amp-hours should I be shooting for? I believe that I can find a way to construct a battery pack
that straps onto the frame, and leaves the cells removable for recharging. Thanks in advance for
your advice on this matter.

Take apart the old one. If it's a sealed gel-cell (lead-acid), do as above and get one with the same
voltage (probably 12v) and amp-hour rating so it will work with the existing charger. Check the
yellow pages for a battery store. The ones that supply batteries for forklifts, etc. will usually
also sell gel-cells for emergency lighting -- one of these should work fine.

If it's individual cells, try to determine if they're NiMH or NiCd (it'll usually say on the cells).
Count the cells. Get the same number of cells. Usually, the amp-hour rating is on each battery also.
Get about the same and do as above 🙂. There're lots of good online sources for AA sized NiMH and
NiCd online.

If you don't have the old battery, then check the voltage rating of a replacement light. For NiHM
or NiCd, divide this by 1.2 and round-up (12v would be 10 cells in series). Sometimes, they
overvoltage the light for more brightness at the expense of the bulb not lasting as long -- I can't
help here except to suggest trial-and-error -- if the new setup's not as bright as the old one, try
adding a cell.

If you want to go for longer burn time, then get batteries with a larger amp-hour rating, but if you
go up by more than about 10-15%, you'll probably need to get a charger. You'll also want to charge
them for that much longer. I.e., was 1000 ma-hr, replaced with 1100 ma-hr -- charge 10% longer (7.7
hours instead of 7 -- I'd just go with 8).

Also, you can switch from one battery type to another if you match the voltage and get a new
charger. NiMH has about the best anp-hours (run time) vs. weight of the batteries that are readily
available.

David

"ram" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I have an old (ca. 1997-98) Nite Rider headlight that has given me many years of good use.
Unfortunately, due to a freak accident, I destroyed the battery to run it with. A new battery from
Nite Rider is priced at a whopping $160, which I don't really have. Is there a DIY way to build a
battery pack to run this bulb? I still have the original jack that fits into the light, can I hook
it up to some NiMH batteries from radio shack and get it to run? What kind of voltage and
amp-hours should I be shooting for? I believe that I can find a way to construct a battery pack
that straps onto the frame, and leaves the cells removable for recharging. Thanks in advance for
your advice on this matter.

Nearly all bike lights are either 12 or 6 volt. Any sort of battery will work, a 12 volt battery on
a 15 watt light will draw about 1.25 amperes, so to get a 2 hr run time you'll need 2.5 a/hr (or 30
w/hr). Do a google search on newsgroups and you'll find lots of stuff, as these lights are very
popular and there's lots of DIY stuff done. I believe I've heard of battery sellers that will even
make up a new water bottle set of welded NiCads (NicadLady.com ??).

Peter Cole said:

"ram" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I have an old (ca. 1997-98) Nite Rider headlight that has given me many years of good use.
Unfortunately, due to a freak accident, I destroyed the battery to run it with. A new battery
from Nite Rider is priced at a whopping $160, which I don't really have. Is there a DIY way to
build a battery pack to run this bulb? I still have the original jack that fits into the light,
can I hook it up to some NiMH batteries from radio shack and get it to run? What kind of voltage
and amp-hours should I be shooting for? I believe that I can find a way to construct a battery
pack that straps onto the frame, and leaves the cells removable for recharging. Thanks in advance
for your advice on this matter.

Nearly all bike lights are either 12 or 6 volt. Any sort of battery will work, a 12 volt battery
on a 15 watt light will draw about 1.25 amperes, so to get a 2 hr run time you'll need 2.5 a/hr
(or 30 w/hr). Do a google search on newsgroups and you'll find lots of stuff, as these lights are
very popular and there's lots of DIY stuff done.

The Bikecurrent archives at topica.com are probably the best online resource. Use the search engine
judiciously -- there's a lot more there than you need to know. People on the list are very helpful,
but it isn't Usenet, so a higher level of netiquette is expected. Read everything else you can find
first, *then* ask *intelligent* queations.

Quoted message said:

I believe I've heard of battery sellers that will even make up a new water bottle set of welded
NiCads (NicadLady.com ??).

The Nicad Lady is an excellent source, for cells or cutom made packs. A friend of mine did indeed
get some packs made up there for a movie camera.

Definately get cells with solder tabs. Otherwise you'll have a heck of a time trying to solder them.
Pros use metal straps for wiring, spot welded on.

For cheap stuff on sale, check out BYD Battery (bydusa.com?). Don't get your cells from Radio
Shack. They're cheap, low quality generics from China, marked up incredibly. Others are a lot
better, and cheaper.

The easiest way to mount batteries on a frame is probably with a water bottle and cage.
Soldering some cells together and stuffing them into a water bottle is easy enough. Use your
imagination to make it work. The hot tip for holding the batteries in place is weatherstripping
foam in a spray can.

Don't try to use a lead-acid battery with this light, as others have suggested. Lead-acids really
don't put out enough current for a 15W light. 10W is the practical maximum. They also give you less
run time, unless you get a huge, heavy one, and your light will dim as the battery runs down. Plus,
they should have a different kind of charger. Nicad or NiMH will deliver more current to begin with,
and maintain their output throughout discharge. You can also use the charger you already have.

Have fun!

Matt O.